Commercial Cleaning Robot

Spotless floors,
zero supervision.

The PadBot C3 sweeps, scrubs and vacuums in a single autonomous pass — mapping your facility, dodging obstacles and recharging itself so your crew can focus on the work that needs a human.

Request a quote Watch the film
Download spec sheet
Mop · sweep · vacuum · dust-mop Autonomous navigation Self-recharging
CE Certified
RoHS Compliant
EU Stock Ready
GDPR Ready
PadBot C3 commercial cleaning robot
LiDAR mappingcentimetre-level precision
Auto-rechargeresumes where it stopped

4-in-1 cleaning

Mopping, sweeping, vacuuming and dust-mopping in one pass — a 500 rpm roll brush and 15,000 rpm suction motor leave no debris or stains behind.

LiDAR mapping

Builds and remembers accurate maps of complex commercial layouts for consistent, repeatable coverage.

Obstacle avoidance

Detects people, carts and fixtures in real time and reroutes smoothly — safe to run in busy public spaces.

Recharge & resume

Returns to its dock when low on power, then continues the unfinished route without human help.

Auto water & waste

Large-capacity tanks plus automatic clean-water refill and waste-water draining at the dock mean long, hands-free runs with fewer stops.

Unmanned operation

Long battery life and self-service docking keep it cleaning around the clock with minimal supervision.

Built for the spaces you clean
Shopping Malls Offices Hospitals Airports Hotels
How it works

Set it once. It runs itself.

No operator walking behind a machine. The C3 learns your floor plan, then cleans on schedule — night or day.

STEP 01

Map the floor

On its first run the C3 builds a precise map of your space with onboard LiDAR and vision — no markers or wires to install.

STEP 02

Clean autonomously

It sweeps, scrubs and vacuums in one pass, intelligently routing around people, carts and furniture as they move.

STEP 03

Dock & recharge

When the battery or tank runs low it returns to the dock on its own, recharges, then picks up exactly where it left off.

Specifications

Technical specs

The full technical specification of the PadBot C3 — cleaning hardware, navigation, power, tanks and charging dock.

Cleaning functionsMop · Sweep · Vacuum · Dust-mop
NavigationSide-mounted Laser Radar (LiDAR)
Obstacle avoidanceMulti-sensor, real-time
Brush & suction500 rpm roll · 15,000 rpm motor
Display5″ LED expressive face
Compatible floorsTile · Marble · Vinyl · Concrete
Battery29.5 V · 46,000 mAh
Runtime / charge4 h / 2.5 h
Clean / sewage tanks25 L / 25 L
Water managementAuto refill & drain
RechargingAutomatic docking & resume
Noise level75 dB
Robot size (W×H×L)500 × 600 × 580 mm
Robot weight53.8 kg
Charging base300 × 700 × 528 mm · 25 kg
Base power100–200 V AC
Where it works

One machine for every floor you service

From polished mall concourses to busy hospital corridors, the C3 adapts its route and cleaning mode to the space.

PadBot C3 cleaning a shopping-mall concourse

Malls & retail

Large open concourses cleaned overnight, ready before doors open.

PadBot C3 cleaning an office lobby

Offices & lobbies

Quiet, consistent cleaning around desks, reception and walkways.

PadBot C3 cleaning a hospital corridor

Hospitals & clinics

Repeatable hygiene standards in long, high-traffic corridors.

PadBot C3 cleaning an airport terminal

Airports & transit

Round-the-clock coverage of vast terminals without extra crew.

Why C3

Manual crew vs. PadBot C3

The same floors, covered more consistently — and freeing your team for higher-value work.

Capability
Manual cleaning
PadBot C3
Overnight / off-hours coverage
Costly shift premiums
Runs unattended 24/7
Consistent, repeatable results
Varies by person
Mapped, identical every pass
Scales without more hires
Linear labour cost
Add floors, same crew
Cleaning reports & coverage logs
Manual sign-off
Automatic cloud reports
ROI estimator

Estimate a first
payback range.

An illustrative model built on PadBot’s published field rates. Use it as a starting point — then we’ll replace it with numbers from your own sites.

Facility area5,000 m²
1,000 m²10,000 m²
Labor cost€22 / hr
€12 / hr€35 / hr
Annual labor savings
€23,833
Estimated payback14 months
Efficiency gain+500%

Illustrative model: manual rate ≈ 1,000 m²/h vs. C3 rate 6,000 m²/h, 260 cleaning days/year, list price €28,000. Real numbers depend on shift schedule and site conditions.

Get a tailored ROI

These figures use PadBot’s published rates. Share your site sizes and crew costs and we’ll build an exact model for your floors.

See it in action

The C3, on the floor

Watch the C3 map, clean and dock — pick a clip to play it in the viewer.

Clips · 4
FAQ

Questions, answered

No. The C3 maps your space on its first run using onboard LiDAR and vision — there are no wires, beacons or markers to install. You simply set the cleaning zones and schedule.

Yes. Multi-sensor obstacle avoidance detects people, carts and fixtures in real time and reroutes smoothly, so it can clean safely in busy public areas during opening hours.

It automatically returns to its docking station to recharge and can be set up to refill, then resumes the unfinished route exactly where it stopped — no operator needed.

The C3 stores multiple maps and connects to a cloud fleet platform, so you can manage schedules, zones and reports across floors and locations from one dashboard.

We provide onboarding, remote diagnostics and a manufacturer warranty. Share your region in the form below and our team will confirm the local service and warranty terms.

Request a quote

Let’s size a fleet for your floors.

Tell us a little about the spaces you service and we’ll come back with pricing, lead times and a tailored ROI.

Hotline
+86 (020) 3845 6676
Email
contact@padbot.com
Headquarters
Building B8, No.2 Tengfei 2nd Street, Knowledge City, Huangpu District, Guangzhou, China

We’ll reply within one business day. No spam, ever.

Request received

Thanks — our team will be in touch within one business day with pricing and a tailored ROI for your sites.